Connect with us

The Tokusatsu Network

This Week in Tokusatsu Merchandise 5/24/21 – 5/28/21

Apparel and Jewelry

This Week in Tokusatsu Merchandise 5/24/21 – 5/28/21

You can support TokuNet for as little as $1 a month and every single pledge goes towards new content to keep us running. Please pledge today! Become a Patron!

The tokusatsu merchandise roundup for the final full week of May 2021 features new merchandise from the Kamen Rider, Super Sentai, Godzilla, and Ultra Series


Starting off the Kamen Rider collection, we have the Kamen Rider mountain parkas. Each parka is made of 100% nylon for the outer material and 100% polyester for the lining. All come in sizes: M (Length (CB): 72 cm, Shoulder width: 46.5 cm, Bust (around): 115 cm, and Sleeve length: 61 cm), L (Length (CB): 75 cm, Shoulder width: 48 cm, Bust (around): 120 cm, and Sleeve length: 64 cm), and XL (Length (CB): 78 cm, Shoulder width: 49.5 cm, Bust (around): 125 cm, and Sleeve length: 66 cm). There are four designs available: Kamen Rider 1, Kamen Rider Kuuga, Kamen Rider 555, and Kamen Rider W.

The Kamen Rider 1 Mountain Parka has a design inspired by Kamen Rider 1’s suit. The body is switched between black and green, and the collar is colored in the image of a red muffler. Two lines are the point on the sleeves. The Tachibana Racing Club mark is embroidered on the left waist. On the back, the MASKED RIDER logo is a reflector print. With a slightly longer length, it is also suitable for daily use.

The Kamen Rider Kuuga Mountain Parka has a design inspired by Kamen Rider Kuuga’s Mighty Form. It has a black and red color scheme. The Kuuga mark is embroidered on the left waist. On the back, the MASKED RIDER KUUGA logo is a reflector print. With a slightly longer length, it is also suitable for daily use.

The Kamen Rider 555 Mountain Parka has a design inspired by Kamen Rider 555’s primary form. The body has a color scheme that switches between black and gray and has red accents. The point is the two horizontal lines of red and black on the sleeves. The left waist has a 555 mark embroidered on it. On the back, the MASKED RIDER FAIZ logo is a reflector print. With a slightly longer length, it is also suitable for daily use.

The Kamen Rider W Mountain Parka has a design inspired by Kamen Rider W’s Cyclone Joker form. The body is a bicolor design with half black and half green in the middle. The W mark is embroidered on the left waist. On the back, the KAMEN RIDER DOUBLE logo is a reflector print. With a slightly longer length, it is also suitable for daily use.

The Kamen Rider mountain parkas from various Kamen Rider series will each go for 19,800 Yen (tax included) and are scheduled for shipment in September 2021. Preorders are being accepted today.

The Yoshihito Sugahara Project is once again collaborating with Kamen Rider to bring the Kamen Rider 555 Axel Form t-shirt. The Kamen Rider 555 Axel Form t-shirt features Kamen Rider 555 running in his Axel Form. The SMART BRAIN logo as well as the 555 symbol and “MASKED RIDER 555 AXEL FORM” are printed on as well. The shirt is made of 100% cotton and comes in sizes: M (US S), L (US M), and XL (US L).

The Yoshihito Sugahara Project is also releasing the Kamen Rider Kabuto “Masked Rider System” t-shirt. The Kamen Rider Kabuto “Masked Rider System” t-shirt features Kamen Riders Kabuto, Gattack, The Bee, Sasword, and Drake. This t-shirt has a particularly strong artistic color in the Yoshihito Sugahara project catalog, which depicts the brave figures of Kamen Riders transformed by the special combat system developed by ZECT on the entire surface of the t-shirt like a canvas. The shirt is made of 100% cotton and comes in sizes: M (US S), L (US M), and XL (US L).

The Yoshihito Sugahara Project Kamen Rider 555 Axel Form t-shirt from Kamen Rider 555 and the Yoshihito Sugahara Project Kamen Rider Kabuto “Masked Rider System” t-shirt from Kamen Rider Kabuto will each go for 4,180 Yen (tax included). Both are scheduled for shipment in July 2021. Preorders are being accepted starting May 24, 2021, at 10:00 JST.

Shachi! Unagi! Tako! (Splash) Sha-Sha-Shauta, Sha-Sha-Shauta!” Count the Medals with the Acrylic Logo Display EX Kamen Rider OOO Shouta Combo Mark and the Acrylic Logo Display EX Kamen Rider OOO Shouta Combo Core Medals. Each is a new form of display featuring a logo that symbolizes the character. It has a thickness of about 10 mm and surface processing. The logo should produce a sense of presence and luxury. The acrylic logos present various display possibilities such as decorating as a single item or decorating with a collection. Both are made of acrylic.

The Acrylic Logo Display EX Kamen Rider OOO Shouta Combo Mark features the Shouta Combo symbol used as his chest armor. The body measures approximately a width of 57 mm x height of 60 mm with the pedestal measuring approximately a width of 65 mm x ​​height of 23 mm.

The Acrylic Logo Display EX Kamen Rider OOO Shouta Combo Core Medals features Mezool’s Core Medals: Shachi, Unagi, & Tako. This is a set of 3 types of each Core Medal of the combo. You can mix and match the combo according to your collection and can be displayed with other Acrylic Logo Display EX Core Medal releases. The body measures approximately a width of 40 mm x height of 45 mm with the pedestal measuring approximately a width of 65 mm x ​​height of 23 mm.

The Acrylic Logo Display EX Kamen Rider OOO Shouta Combo Mark from Kamen Rider OOO will go for 1,320 Yen (tax included) while the Acrylic Logo Display EX Kamen Rider OOO Shouta Combo Core Medals will go for 1,980 Yen (tax included). Both are scheduled for shipment in July 2021. Preorders are being accepted until June 13, 2021, at 23:00 JST.

Kamen Rider Saber joins the Acrylic Logo EX line with the Acrylic Logo Display EX Kamen Rider Saber logo and the Acrylic Logo Display EX Kamen Rider Saber Brave Dragon Mark. Both are a new form of display featuring logos that symbolize the character. Both have a thickness of about 10 mm and surface processing. Both marks should produce a sense of presence and luxury. The acrylic logos present various display possibilities such as decorating as a single item or decorating with a collection. Everything is made of acrylic.

The Acrylic Logo Display EX Kamen Rider Saber logo measures approximately a width of 120 mm x height of 42 mm. The pedestal measures approximately width of 115 mm x height of 23 mm.

The Acrylic Logo Display EX Kamen Rider Saber Brave Dragon Mark measures approximately a width of 59 mm x height of 60 mm. The pedestal measures approximately a width of 115 mm x height of 23 mm.

The Acrylic Logo Display EX Kamen Rider Saber logo from Kamen Rider Saber will go for 1,320 Yen (tax included) and is scheduled for shipment in July 2021. Preorders are being accepted starting May 24, 2021, at 10:00 JST until June 13, 2021, at 23:00 JST.

The saber is in your hands with the Kamen Rider Saber Sword of Logos Chronograph Watch. From Kamen Rider Saber, it is a chronograph wristwatch designed in the image of the Sword of Logos. The coloring combines navy and antique gold with the image of the Sword of Logos uniform. It is a wristwatch that is also practical. In the center, the Sword of Logos mark is engraved on the entire dial. The index (number part) uses the characters in the work for engraving, and is designed to express the world view of Kamen Rider Saber. The case, case back, and crown are made of stainless steel. The dial and hands are made of brass. The windshield is made of mineral glass. The band is made of cowhide (lining / synthetic leather) and the machine used is the TMI VD53 (Japanese quartz). The watch body measures 42 mm horizontally x 49 mm vertically x 12 mm thickness. The bandwidth measures 20 mm with the around the arm size measuring about 13.5 cm-19.5 cm. It is 10 water pressure waterproof.

The Kamen Rider Saber Sword of Logos Chronograph Watch from Kamen Rider Saber will go for 25,300 Yen (tax included) and is scheduled for shipment in August 2021. Preorders are being accepted starting May 25, 2021, at 10:00 JST.

 

Bandai Gashpon announced the release of the Kamen Rider Saber Heroes Collection featuring chibi versions of the Kamen Rider Saber characters. Each figure is an SD figure with a special pedestal. These heroes burn the hottest with the lineup including: Kamen Rider Saber Dragon Alangina, Kamen Rider Espada Golden Alangina, Touma Kamiyama and Kento Fukamiya.

The Kamen Rider Saber Heroes Collection figures from Kamen Rider Saber will go for 400 Yen (tax included) each and are scheduled for release in May 2021.

The celebration doesn’t stop! Premium Bandai is also releasing the Acrylic Logo Display EX Kamen Rider 50th anniversary logo. From Kamen Rider, the 50th anniversary logo is now available. Feel the history of the hero! The logo is available in two colors: black and clear. Specifications for each color are the same. The body measures approximately width of 63 mm x height of 65 mm. The pedestal measures approximately width of 115 mm x height of 23 mm. Everything is made of acrylic.

The Acrylic Logo Display EX Kamen Rider 50th anniversary logo will go for 1,650 Yen (tax included) and is scheduled for shipment in July 2021. Preorders are being accepted starting May 24, 2021, at 10:00 JST until June 13, 2021, at 23:00 JST.

Premium Bandai is releasing a new wave of Kamen Rider 50th Anniversary goods. This time it features: a kitchen mat, leather round wallet, polo shirts, and a leather pouch. The kitchen mat and leather round wallet both feature embossed marks of every main Kamen Rider from Kamen Rider (1971) to Kamen Rider Saber (2020) and the 50th anniversary logo.

The Kamen Rider 50th Design Kitchen Mat is a kitchen mat with successive mark designs to commemorate the 50th anniversary of Kamen Rider. Two types are available: a checkered pattern designed in black and gray check and a logo bias check pattern in which the logo is checked diagonally. It can be wiped and cleaned. The mat is easy to clean and can be cleaned by simply wiping water and dirt. The firm and moderate cushioning material reduces the burden on your legs.
The thickness is a smart 6 mm size, so it is hard to get caught in your feet or the lower drawer and you can clean it smoothly. The mat measures 45 cm x 120 cm and is made of vinyl chloride.

The Kamen Rider 50th Design Kitchen Mat will go for 7,590 Yen (tax included).

The Kamen Rider 50th Design Genuine Leather Round Zipper Wallet (Brown) is a genuine leather round wallet with successive mark designs to commemorate the 50th anniversary of Kamen Rider. It uses brown leather with a matte texture that gives a good taste to the surface when used. The color is a deep brown like chocolate. The interior has a lot of storage and is perfect for a wallet for everyday use. There is zippered opening and closing. The outside has one back pocket. The inside has one
zippered coin purse, three bill compartments, two pockets, and thirteen card pockets (one of which is located on one side of the coin purse). It measures a width of 195 mm × height of 95 mm × diameter of 25 mm. The wallet is made of cowhide synthetic leather Rayon.

The Kamen Rider 50th Design Genuine Leather Round Zipper Wallet (Brown) will go for 16,500 Yen (tax included).

The Kamen Rider 50th One Point Polo Shirt was made in commemoration of the 50th anniversary of Kamen Rider, in pursuit of comfortable everyday wear, a polo shirt with one-point embroidery of Kamen Rider is now available. It is a clean polo shirt made of Kanoko material. There are three types available: Kamen Rider’s profile one-point pattern (blue), Tachibana Racing Club club mark pattern (black), and 1 & Kuuga & Zero One mark one-point pattern (white). The body is made of 80% cotton and 20% polyester with the rib part made of 100% polyester. It comes in sizes: M (Length: 68 cm, Width: 51 cm, Shoulder width: 44 cm, and Sleeve length: 20 cm), L (Height: 70 cm, Width: 54 cm, Shoulder width: 46 cm, and Sleeve length: 21 cm), and XL (Length: 72 cm, Width: 57 cm, Shoulder width: 48 cm, and Sleeve length: 22 cm).

The Kamen Rider 50th One Point Polo Shirt will go for 5,390 Yen (tax included).

The Kamen Rider 50th 1, Kuuga Zero One Genuine Leather Pouch (Brown) is a genuine leather pouch that commemorates the 50th anniversary of Kamen Rider. It is made of genuine leather with embossed Kamen Rider 1, Kamen Rider Kuuga, Kamen Rider Zero One marks as they are the first Rider marks of each era. The leather multi-case is perfect for storing small items. The size allows you to carry mobile accessories smartly is perfect for business use. The well-balanced surface logo is a nice accent without being too casual. There is zippered opening and closing as well as one pocket. The pouch measures a width of 175 mm × height of 115 mm × diameter of 45 mm. The surface and zipper pull tab are made of leather while the fabric is made of Rayon.

The Kamen Rider 50th 1, Kuuga Zero One Genuine Leather Pouch (Brown) will go for 9,900 Yen (tax included).

All are scheduled for shipment in September 2021 except the polo shirt which is scheduled for shipment in August 2021. Preorders are being accepted today.

Shocker will absorb the power of Geldam… and become Gelshocker. Gelshocker will definitely conquer the world. To that end, we will murder, riot and destroy as much as possible…But as long as Kamen Rider is around… it will suffer the same fate as Shocker, even with the addition of Geldam!

Show off your love for Shocker with the Kamen Rider Gel Shocker Chief Hooded Towel. Goods featuring the Gel Shocker Leader are now available. It replicates the eerie and strange feeling with a hooded towel. On the back, the title of the Gel Shocker’s appearance is designed on. If you put this on, you can enjoy watching LIVE games indoors with a more festival feeling. The body measures approx. width of 109 cm x height of 39 cm while the hood measures approx. width of 38 cm x height of 25 cm. The front is made of 100% polyester and the back is made of 100% cotton.

The Kamen Rider Gel Shocker Chief Hooded Towel from Kamen Rider will go for 3,300 Yen (tax included) and is scheduled for shipment in July 2021. Preorders are being accepted starting May 28, 2021, at 11:00 JST until June 17, 2021, at 23:00 JST.

Moving onto the Super Sentai Series, we have the Kikai Sentai Zenkaiger Pouch with Kiramager Gear set. The pouch features ZenkaiJuran, Zenkaizer, ZenkaiGaon, ZenkaiMagine, Twokaizer, and ZenkaiVroon with their respective colors behind them. The border has “KIKAISENTAI” and “ZENKAIGER” written out. The Mashin Sentai Kiramager Sentai gear No. 44 is included. It is compatible with the DX All-World Transformation Gun DX Geartlinger. The pouch measures approx. a width of 17.5 cm × height of 13 cm (Bottom gusset 5.5 cm) and is made of cotton.

The Kikai Sentai Zenkaiger Pouch with Kiramager Gear set from Kikai Sentai Zenkaiger will go for 2,200 Yen (tax included) and is scheduled for shipment in July 2021. Preorders are being accepted starting May 28, 2021, at 11:00 JST until June 20, 2021, at 23:00 JST.

Celebrating its 50th Anniversary, Hedorah is getting a wave of new merchandise featuring t-shirts, acrylic keychain, towel, pouch, and cap. Hedorah is a monster of pure contamination, feeding off factory smog and waste fluids to grow. It turns metal to rust and bone to ashes wherever it passes.

The Godzilla Hedorah Graphic t-shirt features the pollution monster, Hedorah, who fascinates us and is now designed in a POP style. The shirt is made of 100% cotton and comes in sizes: S (US XS), M (US S), L (US M), XL (US L), and XXL (US XL). It is also available in two colors: black and white.

The Godzilla Hedorah Graphic t-shirt from Toho’s 1971 film Godzilla vs. Hedorah will go for 3,850 Yen (tax included).

Next, we have the Godzilla Hedorah Flying t-shirt. The shirt features a gliding Hedorah with “ヘドラ” printed next to it. The shirt is made of 100% cotton and comes in sizes: S (US XS), M (US S), L (US M), XL (US L), and XXL (US XL). It is also available in two colors: black and white.

The Godzilla Hedorah Flying t-shirt from Toho’s 1971 film Godzilla vs. Hedorah will go for 3,850 Yen (tax included).

Following is the Godzilla Hedorah Graffiti t-shirt. The pollution monster Hedorah is now designed as a POP in a graffiti style. Depending on the color of the shirt, Hedorah is a different color. The shirt is made of 100% cotton and comes in sizes: S (US XS), M (US S), L (US M), XL (US L), and XXL (US XL). It is also available in two colors: black and green.

The Godzilla Hedorah Graffiti t-shirt from Toho’s 1971 film Godzilla vs. Hedorah will go for 3,850 Yen (tax included).

The Godzilla Hedorah 50th Anniversary 3D Acrylic Keychain is an acrylic key chain designed with the pollution monster Hedorah, who fascinates us. It will be a three-dimensional design in which two acrylics are layered. The keychain measures
approx. a width of 69 mm × height of 64 mm and is made of acrylic.

The Godzilla Hedorah 50th Anniversary 3D Acrylic Keychain from Toho’s 1971 film Godzilla vs. Hedorah will go for 770 Yen (tax included).

After, we have the Godzilla Hedorah 50th Anniversary Multi Cover Towel. This is a multi-cover towel that can also be used as a PET bottle cover or mask case and is designed with the pollution monster Hedorah. The towel measures about 24 cm in height and 14 cm in width. It is made of 100% polyester on the front and 100% cotton on the back. It is available in both black and color.

The Godzilla Hedorah 50th Anniversary Multi Cover Towel from Toho’s 1971 film Godzilla vs. Hedorah will go for 880 Yen (tax included).

Then, we have the Godzilla Hedorah 50th Anniversary Pouch. It is a pouch designed with the pollution monster Hedorah. The front has the Hedorah 50th Anniversary logo and the back has black and grey splatters to represent the pollution. It measures approx. width of 11 cm × height of 20 cm and is made of 100% polyester.

The Godzilla Hedorah 50th Anniversary Pouch from Toho’s 1971 film Godzilla vs. Hedorah will go for 2,200 Yen (tax included).

Lastly, there’s the Godzilla Hedorah 50th Anniversary cap. It is a black cap embroidered with a logo commemorating the 50th anniversary of the pollution monster Hedorah. The cap measures approximately 55 cm-60 cm and is made of 100% polyester. Two designs are available: “Hedorah50th” and “ヘドラ50th”.

The Godzilla Hedorah 50th Anniversary cap from Toho’s 1971 film Godzilla vs. Hedorah will go for 4,180 Yen (tax included).

All are scheduled for shipment in July 2021. Preorders are being accepted until June 13, 2021, at 23:00 JST.

A bright light will appear in the western sky when the first star comes out. Look for that moving light, because that will be me.” Collaborating with American watch maker, ZINVO, Premium Bandai is releasing the Ultraseven ZINVO -ULTRASEVEN Limited Edition- watch. This is a limited edition collaboration model between Ultraseven and the unique watch maker “ZINVO” from the United States.

The turbine type second hand, which is the biggest feature of ZINVO, is an original design with the motif of Ultraseven’s “Ice Lugger”. The Ice Lugger rotates on the dial to replace the second hand and keep track of time. Luminescent paint is used for the dial, and when you look at the dial in a dark place, you can see the rays that spread radially, which is the image of Ultraseven’s biggest trump card “Wide Shot”. The back case is printed with the Ultra Guard mark. The durable and thick strap is made of carefully selected cowhide. There are three colors available: red, black, and blue and it comes in an original special case. It has a discerning automatic winding mechanic (self-winding: a mechanism that automatically winds the mainspring by using the swing of the wristwatch when attached). The Turbine-type second hand is a patent-pending rotating turbine on the dial inspired by the jet turbine replaces the second hand. It is characterized by the design. Due to its unique appearance, it ignited on SNS and is now open in fashion fairs and premium boutiques in more than 40 countries as a collection representing ZINVO.

The case measures 44 mm x 44 mm and has a thickness of 12 mm. The movement is automatic winding. It is 5 ATM waterproof. The case is made of 316L stainless steel. The glass is made of anti-reflective mineral glass and the band is made of leather. The band size measures approximately 24 cm in total length (excluding beautiful locks). The arm circumference measures approximately 16.5 cm to 21.5 cm (size adjustment hole deepest to end).

The Ultraseven ZINVO -ULTRASEVEN Limited Edition- watch from Ultraseven will go for 66,000 Yen (tax included) and is scheduled for shipment in October 2021. Preorders are being accepted starting May 26, 2021, at 11:00 JST.

Ultraman Gaia also joins the Acrylic Logo EX line with the Acrylic Logo Display EX Ultraman Gaia logo and Acrylic Logo Display EX Ultraman Gaia XIG symbol.

The Acrylic Logo Display EX Ultraman Gaia logo measures approximately a width of 119 mm x height of 50 mm with a pedestal measuring approximately a width of 115 mm x height of 23 mm.

The Acrylic Logo Display EX Ultraman Gaia XIG symbol measures approximately a width of 57 mm x height of 67 mm with a pedestal that measures approximately a width of 65 mm x ​​height of 23 mm.

The Acrylic Logo Display EX Ultraman Gaia logo and Acrylic Logo Display EX Ultraman Gaia XIG symbol from Ultraman Gaia will each go for 1,320 Yen (tax included) and are scheduled for shipment in July 2021. Preorders are being accepted starting May 26, 2021, at 10:00 JST until June 13, 2021, at 23:00 JST.

Finally, we have the Ultraman Zeas Ultra Heel Drop collection featuring a t-shirt and a towel. Both feature an Ultra Heel Drop design. The “heel drop” that he learned at the end of his training in the movie version is expressed in a cool drawing design.
Both are must haves for Ultraman Zeas fans.

The Ultraman Zeas Ultra Heel Drop t-shirt is made of 100% cotton and comes in sizes: S (Length: 65 cm / Width: 47 cm / Shoulder width: 40 cm / Sleeve length: 19 cm), M (Length: 68 cm / Width: 50 cm / Shoulder width: 43 cm / Sleeve length: 20 cm), L (Length: 71 cm / Width: 53 cm / Shoulder width: 46 cm / Sleeve length: 21 cm), and XL (Length: 74 cm / Width: 56 cm / Shoulder width: 49 cm / Sleeve length: 22 cm).

The Ultraman Zeas Ultra Heel Drop Towel measures approx. a width of 39 cm x height of 109 cm. The front is made of 100% polyester and the back is made of 100% cotton.

The Ultraman Zeas Ultra Heel Drop t-shirt from Ultraman Zeas will go for 3,520 Yen (tax included) while the towel will go for 2,750 Yen (tax included). Both are scheduled for shipment in July 2021. Preorders are being accepted starting May 28, 2021, at 11:00 JST until June 17, 2021, at 23:00 JST.

Overseas fans can use From Japan to purchase exclusive tokusatsu merchandise. Click here for our guide to using From Japan.

Source: Premium Bandai and Bandai Gashpon


Also known as HebitsukaiLi Cosplay and @sentairidertaisen44 on Instagram, Charlie Li is a Game Design BFA Graduate at New York University. He enjoys tokusatsu of all kind as well as anime and k-pop. His top 3 Sentai include: Kaizoku Sentai Gokaiger, Samurai Sentai Shinkenger, and Denji Sentai Megaranger.

Click to comment

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Newest Posts

Categories

Subscribe to TokuNet

Enter your email address to subscribe to the Tokusatsu Network and receive notifications of new posts by email.

Support Us

Please consider supporting us on Patreon so we can continue providing quality tokusatsu news coverage.

Become a Patron!

 

You can buy us a coffee via Ko-Fi if you would like to help fuel Team TokuNet.

To Top