This Week in Tokusatsu Merchandise 1/9/22 – 1/14/22

The tokusatsu merchandise roundup for the second week of 2022 features Ultraman Trigger and Ultraseven exclusive merchandise as well as new preorders from the Kamen Rider series.

Starting off this week’s roundup, we have the Kamen Rider #1 LED Light Acrylic Stand. It is an LED accessory stand that matches the interior where the gentle light wraps around the accessories like lighting and can be an accessory holder placed at either the bedside or at the entrance of your room. You can store accessories such as key chains, glasses, rings, and bracelets while decorating them. You can also change the lighting method by switching the switch, and light it not only with batteries but also with a USB connection (with a USB cable of 1m). The size measures 104 mm (W) × 86 mm (D) × 191 mm (H).

The Kamen Rider #1 LED Light Acrylic Stand from the original Kamen Rider will go for 5,280 yen (tax included) and is scheduled for shipment in March 2022. Preorders are being accepted until February 7, 2022, at 23:00 JST.

We also have the Kamen Rider #1 sticky hook. It is a sticky hook from the original Kamen Rider series. The hook features a suction-type hook that holds small items tightly and sticks tightly. Peeling it off is easy too. Bend his limbs to store messy accessories such as toothbrushes, hair ties, glasses, and keys in a cute way. The hook measures 56.7 mm (W) x 148 mm (H) x 9 mm (D). It is made of polyvinyl chloride, steel, PET resin, and PU. The heat resistance is 80 ℃ or less and the load capacity is 250g or less.

The Kamen Rider #1 sticky hook from the original Kamen Rider will go for 1,430 yen (tax included) and is scheduled for shipment in March 2022. Preorders are being accepted until February 7, 2022, at 23:00 JST.

Stay warm with the Kamen Rider Shocker Fighter Narikiri-style knit cap. This is a knit cap inspired by the Shocker fighters from the original Kamen Rider series. The face of a Shocker grunt is expressed in a jacquard weave. It can be worn even with the separately sold Narikiri t-shirt and Narikiri long-sleeved t-shirt. The hat measures approx. 58 cm and is made of 70% wool, 30% acrylic.

The Kamen Rider Shocker Fighter Narikiri-style knit cap from the original Kamen Rider will go for 3,300 yen (tax included) and is scheduled for shipment in February 2022. Preorders are being accepted now.

The Ishinomori Manga Museum x Yoshihito Sugahara Project Kamen Rider Face Towel features a Kamen Rider #1 face towel drawn by Yoshihito Sugahara and originally displayed by the Ishinomori Manga Museum. It is designed for adult fans by Yoshihito Sugahara who has worked on numerous toy packages. The towel measures approx. 29.5 (H) cm x 80 (W) cm. The front is made of 100% polyester and the back is made of 100% cotton.

The Ishinomori Manga Museum x Yoshihito Sugahara Project Kamen Rider Face Towel from the original Kamen Rider will go for 2,200 yen (tax included) and is scheduled for shipment in February 2022. Preorders are being accepted today.

The Kamen Rider Kuuga Chronograph Red/Gold Watch celebrates Kamen Rider Kuuga’s 20th Anniversary and his Rising Mighty form. It is designed in the image of Kuuga’s Rising Mighty form with a red and gold color scheme. The outside of the dial is decorated with gold that resembles the back of Kuuga’s hand. The black color in the center of the dial completes the look and gives it a luxurious feel. The indexes on the dial are in Linto Script to represent the world of the TV series. A red stone at 12 o’clock represents the “O” signal and a yellow stone at 6 o’clock represents the Arcle. The chronograph seconds counter (at 6 o’clock) is engraved with Linto script for time. The leather band is made in Japan by the craftsmen of “Leather Studio Parley”. The leather is carefully hand-polished one by one, and you can enjoy the beautiful gradation that appears as you use it.

The case, back cover, and crown are made of stainless steel. The dial and hands are made of brass. The windshield is made of mineral glass. The band is made of cowhide leather (lining/synthetic leather) and the machine used is the TMI VD53 (Japanese quartz). The watch body measures 42 mm (W) x 49 mm (H) x 12 mm (H). The bandwidth measures 20 mm. The arm circumference measures approx. 13.5 cm – 19.5 cm. The product photos shown are prototypes and may differ from the actual product. The logo on the back cannot be set in the correct position. If you have any skin problems, please stop using the product and consult a doctor.

The Kamen Rider Kuuga Chronograph Red/Gold Watch from Kamen Rider Kuuga will go for 25,300 Yen (tax included) and is scheduled for shipment in March 2022. Preorders are being accepted today.

The Kamen Rider Den-O Makeover! Watch [Live Action Watch] is part of the tokusatsu character watch series “LIVE ACTION WATCH”, a watch that imitates the transformation belt of the 8th Heisei Kamen Rider series, Kamen Rider Den-O. The design is particular about the details, with the image of Den-O’s transformation belt. When you press the button on the side, the red LED illuminates to create that feeling when his sword form is transformed. Each form button and pattern is carefully colored one by one. Since it is close to the original shape of the belt, it feels heavy as a wristwatch. It is a watch with a strong presence that is full of volume and is designed to be enjoyed by adults.

The case is made of alloy and the back cover is made of stainles steel. The dian and needle are made of brass. The light uses LED lighting. The windhield is made of mineral glass. The back cover and crown are made of stainless steel. The strap uses cowhide (lining synthetic leather). The machine used is the MIYOTA Y121E (Made in Japan). It is daily life waterproof. The watch body measures 44 mm (W). The total length measures 95 mm. The belt measures 18 mm (W). The arm circumference measures approximately 16.5 cm to 22.5 cm.

The Kamen Rider Den-O Makeover! Watch [Live Action Watch] from Kamen Rider Den-O will go for 27,500 Yen (tax included) and is scheduled for shipment in February 2022. Preorders are being accepted today.

Premium Bandai is also releasing the Kamen Rider Den-O Watch. It is a wristwatch with the motif of the watch worn by Ryotaro Nogami, the main character of Kamen Rider Den-O. The design incorporates Den-O’s work elements in every detail, such as the Imagin mark. The case, back cover, and crown are made of stainless steel. The band is made of cowhide. The dial and needles are made of brass. The windshield is made of mineral glass. The machine is digital and has a light, alarm, and stopwatch function. It is 5 ATM water resistant. The watch body measures 43 mm (W) x 49 mm (L). The band width measures 20 mm. The arm circumference measures approximately 13.5 cm-19.0 cm.

The Kamen Rider Den-O Watch from Kamen Rider Den-O will go for 19,800 yen (tax included) and is scheduled for shipment in July 2022. Preorders are being accepted until February 13, 2022, at 23:00 JST.

Introducing the Kamen Rider Den-O Ink Pad Ring. It is a silver ring with a crest design from the Kamen Rider Den-O TV series.
It is a Ink pad ring with a simple form. Although it is familiar to your fingers, it has a presence that is typical of an ink pad, and is designed to look great with any finger. The material used is smoked silver925 and the ring comes in sizes: No. 11, No. 13, No. 15, No. 17, No. 19.

The Kamen Rider Den-O Ink Pad Ring from Kamen Rider Den-O will go for 13,200 yen (tax included) and is scheduled for shipment in March 2022. Preorders are being accepted until February 13, 2022, at 23:00 JST.

“Now, count up your sins!”

The Kamen Rider W WINDSCALE chronograph watch is a solid black ceramic watch that represents the body of Kamen Rider W’s Joker side. The dial has the gray pattern of the Kamen Rider W chest subtly incorporated.

Also, with the motif of Shotaro’s favorite car “Hard Boiler” scattered everywhere, the design of the chronograph seconds counter (6 o’clock position) and minute counter (9 o’clock position) features an image of a motorcycle meter. It is a wristwatch that combines the practicality of Kamen Rider W with real-life practicality.

The case exterior and band are made of ceramic. The case body, crown, case back, and buckle are made of stainless steel. The dial and needle are made of brass. The windshield is made of mineral glass, and the machine is the TIME MODULE VD54. The clock body measures 38 mm horizontally x 45 mm vertically The bandwidth measures 20 mm and the band adaptation size is approximately 13 – 19 cm.

The Kamen Rider W WINDSCALE chronograph watch from Kamen Rider W will go for 25,300 yen (tax included) and is scheduled for shipment in March 2022. Preorders are being accepted today.

“Count the Medals! 1, 2, and 3!”

The Kamen Rider OOO / OOO OUTDOOR PRODUCTS collection features Eiji’s Tomorrow’s pants pattern dipack from Kamen Rider OOO. It has a colorful and pop design. This is a collaboration bag series with OUTDOOR PRODUCTS.

The Kamen Rider OOO / OOO OUTDOOR PRODUCTS Daypack features a large front pocket. The front pocket is divided into two layers, upper and lower, and the small pocket on the bottom is the perfect size for holding keys and small pass cases, and the slightly larger pocket on the bottom is the perfect size for a wallet or paperback book. There are pockets on both sides and inside, and a total of 5 pockets are convenient items. The mesh on the back keeps the contact surface with the body, which tends to be muffled, breathable. Since the shoulder strap contains cushioning material, it reduces the burden on the shoulder. The convenient part is that it includes many pockets. The daypack measures (approx.) 31 cm (W) x 41 cm (H) x 12 cm (D). It is made of polyester.

The Kamen Rider OOO / OOO OUTDOOR PRODUCTS Daypack from Kamen Rider OOO will go for 5,610 Yen (tax included) and is scheduled for shipment in May 2022. Preorders are being accepted today.

The Kamen Rider OOO / OOO OUTDOOR PRODUCTS Sakosh Bag is a sakosh bag with a clean silhouette without gusset. The front has a large zipper pocket that allows you to sort and store your luggage. There is also a large pocket inside. Since the shoulder strap is removable, it can be used as a pouch as well. It’s the perfect size for a little outing. The bag measures (approx.) 25.5 cm (W) x 20 cm (H) and is made of polyester.

The Kamen Rider OOO / OOO OUTDOOR PRODUCTS Sakosh Bag from Kamen Rider OOO will go for 5,390 Yen (tax included) and is scheduled for shipment in May 2022. Preorders are being accepted today.

The Kamen Rider OOO / OOO OUTDOOR PRODUCTS Shoulder Bag is a box-shaped shoulder bag. With a large zipper pocket on the front and a magnetic pocket on the back, you can organize and store small items such as tickets and keys. Since it is a type with a solid gusset, it can also hold a long wallet or a thick tri-fold wallet. Since the shoulder strap is removable, it can be used as a pouch without a shoulder strap. The bag measures (approx.) 23 cm (W) x 16.5 cm (H) x 5.5 cm (D). It is made of polyester.

The Kamen Rider OOO / OOO OUTDOOR PRODUCTS Shoulder bag from Kamen Rider OOO will go for 5,610 Yen (tax included) and is scheduled for shipment in May 2022. Preorders are being accepted today.

The Kamen Rider Build B2 Tapestry features a B2 size tapestry designed with Kamen Rider Build, Kamen Rider Cross-Z, Kamen Rider Grease, and Kamen Rider Rogue. It measures approx. 49 cm (W) x 75 cm (H). The tapestry is made of 100% polyester.

The Kamen Rider Build B2 Tapestry from Kamen Rider Build will go for 3,300 yen (tax included) and is scheduled for shipment in March 2022. Preorders are being accepted until February 13, 2022, at 23:00 JST.

The Kamen Rider Zi-O Live-Action Watch is the newest addition to the Live-Action Watch series. It is a wristwatch with the face of Kamen Rider Zi-O, the last Kamen Rider of the Heisei-era, as a motif. Kamen Rider Zi-O’s face is designed as a dial and the crown and body are designed as a metal band. The rotating bezel that incorporates the body color of Zi-O has practical specifications that can measure the elapsed time. The case, crown, back cover, band, and buckle are made of stainless steel. The dial and hands are made of brass. The windshield is made of mineral glass and the machine used is the MIYOTA 2036. The watch body measures 40 mm (W) x 48 mm (L). The bandwidth measures 20 mm. The band applicable size measures approximately 15 cm-21 cm. It is 10 bar waterproof with a warranty period of 1 year from the date of purchase.

The Kamen Rider Zi-O Live-Action Watch from Kamen Rider Zi-O will go for 19,800 yen (tax included) and is scheduled for shipment in February 2022. Preorders are being accepted today.

The Kamen Rider Zero-One Chronograph Watch is a chronograph watch from the Kamen Rider Zero-One TV series. This black watch is inspired by the image of Zero-One’s Rising Hopper form. The design is based on black with Zero-One’s yellow. In the center of the dial is a series of “01’s” reminiscent of the effects of a nave, and on the sides are the silver and red lines of the body. The chronograph seconds counter (at 6 o’clock) is designed with an image of the Hiden Zero-One Driver. This is a watch that expresses the world view of Kamen Rider Zero-One while also being practical.

The case, back cover, crown, and the band are made of stainless steel. The dial and hands are made of brass. The windshield is made of mineral glass and the machine used is the TMI VD53 (Japanese quartz). The watch body measures 40 mm (W) x 47 mm (H) x 12 mm (H). The bandwidth measures 20 mm and the size around the arm measures approx. 13.5 cm – 19.0 cm. It is 10 ATM water resistant. The product photos shown are prototypes and may differ from the actual product. If you experience any skin problems, please stop using the product and consult a doctor.

The Kamen Rider Zero-One Chronograph Watch from Kamen Rider Zero-One will go for 25,300 yen (tax included) and is scheduled for shipment in March 2022. Preorders are being accepted today.

The Kamen Rider Revice “Happy Hot Spring” Logo Hoodie features the “Happy Hot Spring” Logo from the Kamen Rider Revice TV series. It is made of 100% cotton and comes in sizes:

• M (approx.) length: 67 cm, width: 50 cm, shoulder width: 44 cm, sleeve length: 62 cm
• L (approx.) length: 70 cm, width: 53 cm, shoulder width: 47 cm, sleeve length: 63 cm
• XL (approx.) length: 73 cm, width: 56 cm, shoulder width: 50 cm, sleeve length: 64 cm

The Kamen Rider Revice “Happy Hot Spring” Logo Hoodie from Kamen Rider Revice will go for 7,150 yen (tax included) and is scheduled for shipment in March 2022. Preorders are being accepted until February 7, 2022, at 23:00 JST.

The Kamen Rider Revice FENIX TRIBE logo zip up hoodie features the FENIX logo from the Kamen Rider Revice TV series. It is made of 100% cotton and comes in sizes:

• M (approx.) length: 67 cm, width: 50 cm, shoulder width: 44 cm, sleeve length: 62 cm
• L (approx.) length: 70 cm, width: 53 cm, shoulder width: 47 cm, sleeve length: 63 cm
• XL (approx.) length: 73 cm, width: 56 cm, shoulder width: 50 cm, sleeve length: 64 cm

The Kamen Rider Revice FENIX TRIBE logo Hoodie from Kamen Rider Revice will go for 7,700 yen (tax included) and is scheduled for shipment in March 2022. Preorders are being accepted until February 7, 2022, at 23:00 JST.

Soaring into the Ultra Series, we first have the Ultra Seven Ultra Guard Pattern Genuine Leather Round Wallet which has a simple and easy-to-use design with the Ultra Guard mark embossed on genuine leather. As it is made of genuine leather, the more you use it, the cooler it looks. The embossing becomes thinner after repeated use. The actual product and the image may differ slightly. The wallet is made of cowhide and brass plating. It measures approx. 95 mm (H) X approx. 195 mm (W).

The Ultra Seven Ultra Guard Pattern Genuine Leather Round Wallet from Ultraseven will go for 33,000 yen (tax included) and is scheduled for shipment in March 2022. Preorders are being accepted today.

The Ultraman Trigger Deformed Pattern Miscellaneous Goods series features a tote bag, pouch, and face towel. Each item has deformed versions of Kengo Manaka, Mitsukuni Shizuma, Seiya Tatsumi, Yuna Shizuma, Akito Hijiri, Tesshin Sakuma, Himari Nanase, Alien Metron Marluru, Ignis, Yuzare, Reina Manaka, Yurika Shizuma, Ribut, Ultraman Trigger, Ultraman Tiga, Ultraman Z, Ultraman Ribut, Carmeara, Darrgon, Hudram, Trigger Dark, and more.

The Ultraman Trigger Large Assembly Face Towel measures approx. 29.5 cm (H) x 80 cm (H). It is made of 100% polyester on the front and 100% cotton on the back.

The Ultraman Trigger Large Assembly Pouch measures approx. 230 mm (W) x 150 mm (H) (without gusset). The outer material uses 100% polyester  and the lining uses 100% nylon.

The Ultraman Trigger Large Assembly Tote Bag measures approx. 34 cm (W) x 35 cm (H) x 12 cm (gusset) and is made of 100% polyester.

The Ultraman Trigger Deformed Pattern Large Asembly Face Towel from Ultraman Trigger will go for 1,430 yen while the pouch will go for 1,540 yen and the tote bag for 2,750 yen (all tax included). All are scheduled for shipment in February 2022. Preorders are being accepted today.

Overseas fans can use From Japan to purchase exclusive tokusatsu merchandise. Click here for our guide to using From Japan.

Source: Premium Bandai