This Week in Tokusatsu Merchandise 7/26/21 – 7/30/21

The tokusatsu merchandise roundup for the final week of July 2021 features new Kamen Rider rings and necklaces as well as exclusive merchandise from the Kamen Rider, Super Sentai, and Ultra Series. 

Starting off this week’s roundup, we first have the Kamen Rider 1 Transformation Belt Typhoon silver925 ring. This is a ring made of silver925 with the motif of Kamen Rider 1’s transformation belt “Typhoon”. The windmill part of the transformation belt is deformed and arranged like a seal ring. The details on the side have also been recreated, resulting in a ring that is heavy and unique overall. The windmill part is not movable. Each piece is carefully finished by Japanese craftsmen. The silver will develop a tasteful texture and a unique depth as you use it over the years. The ring is made of silver925 smoked finish and comes in sizes: No. 14, No. 16, No. 18, No. 20, No. 22, No. 24, and No. 26.

The Kamen Rider 1 Transformation Belt Typhoon silver925 ring from the original Kamen Rider will go for 16,500 Yen (tax included) and is scheduled for shipment in October 2021. Preorders are being accepted today.

The same ring also comes as the Kamen Rider 1 Transformation Belt Typhoon Ring (Ruby). The windmill in the center is colored with red epoxy resin and has bearings to allow it to turn manually. It is made of silver925 (smoked), natural ruby. stainless steel bearing, and epoxy resin. The ring comes in sizes: No. 12, No. 14, No. 16, No. 18, No. 20, No. 22, No. 24, and No. 26.

The Kamen Rider 1 Transformation Belt Typhoon Ring (Ruby) from the original Kamen Rider will go for 24,200 Yen (tax included) and is scheduled for shipment in October 2021. Preorders are being accepted today.

The Kamen Rider Tachibana Racing Club silver925 necklace is a dog tag shaped necklace with the mark of Tachibana Racing Club from the original Kamen Rider series. This is an authentic accessory made of silver925. The mark, logo and year of the Tachibana Racing Club are engraved and painted in red and black. This product is made by etching and half-carving a silver925 plate to express details, and then pressing it with an original size dye. The detailed work is carefully done one by one by Japanese craftsmen. The small size makes it not too assertive and makes your neck look gorgeous in any scene.

As you use it over the years, the silver will develop a tasteful texture and a unique depth. The pendant top is made of painted silver925 and the necklace is made of plated iron. The pendant top measures a height of approx. 25 mm x width of approx. 15 mm x thickness of 1.5 mm. The total length of the necklace section measures 50 cm (including 5 cm for the adjuster). The photos are prototypes and may differ from the actual product. There is a little individual difference because the processing is done by hand. If you feel any abnormality on your skin, please stop using it and consult a specialist.

The Kamen Rider Tachibana Racing Club silver925 necklace from the original Kamen Rider will go for 8,800 Yen (tax included) and is scheduled for shipment in October 2021. Preorders are being accepted today.

Premium Bandai is releasing the Kamen Rider 1 POP Art collection which includes a t-shirt, acrylic keychain, acrylic block stand, multi-cover towel, cushion, towel, and acrylic stand. Each item features Kamen Rider #1 designed in the style of modern POP art.

The Kamen Rider 1 POP Art t-shirt is made of 100% cotton and comes in sizes: S (length: 66 cm, body width: 49 cm, shoulder width: 44 cm, sleeve length: 19 cm), M (length: 70 cm, Body width: 52 cm, Shoulder width: 47 cm, Sleeve length: 20 cm), L (length: 74 cm, width: 55 cm, shoulder width: 50 cm, sleeve length: 22 cm), and XL (length: 78 cm, width: 58 cm, shoulder width: 53 cm, sleeve length: 24 cm).

The Kamen Rider 1 POP Art t-shirt from the original Kamen Rider will go for 3,300 Yen (tax included).

The Kamen Rider 1 POP Art acrylic keychain is an acrylic key ring with POP art. It is made of acrylic and measures approx. width of 66 mm x height of 58 mm.

The Kamen Rider 1 POP Art acrylic keychain from the original Kamen Rider will go for 550 Yen (tax included).

The Kamen Rider 1 POP Art Acrylic Block Stand is an acrylic block stand with POP art. It is made of acrylic and has a body that measures approx. width of 110 mm x height of 105 mm. The pedestal measures approx. width of 67 mm x height of 19 mm.

The Kamen Rider 1 POP Art Acrylic Block Stand from the original Kamen Rider will go for 1,540 Yen (tax included).

The Kamen Rider 1 POP Art Multi Cover Towel is a multi-cover towel is made of POP art. It can also be used as a plastic bottle cover or mask case. Please note that it cannot be rolled up depending on the shape of the plastic bottle. It is made of 100% Polyester on the front and 100% Cotton on the back (pile side). The towel measures approx. height of 24 cm x width of 14 cm.

The Kamen Rider 1 POP Art Multi Cover Towel from the original Kamen Rider will go for 770 Yen (tax included).

The Kamen Rider 1 POP Art Cushion is a cushion with POP art. The side fabric is made of 100％ polyester and the padding is made of 100％ polyester. It measures approx. width of 26 cm x height of 22 cm.

The Kamen Rider 1 POP Art Cushion from the original Kamen Rider will go for 1,870 Yen (tax included).

The Kamen Rider 1 POP Art Towel is a large towel of B2 size that is used with POP art. The front is made of 100% polyester and the back (pile side) is made of cotton. It measures approx. width of 728 mm x height of 515 mm.

The Kamen Rider 1 POP Art Towel from the original Kamen Rider will go for 2,200 Yen (tax included).

The Kamen Rider 1 POP Art Acrylic Stand is an acrylic stand with POP art. It is made of acrylic. The body measures approx. width of 90 mm x height of 63 mm and the pedestal measures approx. width of 70 mm x height of 34 mm.

The Kamen Rider 1 POP Art Acrylic Stand from the original Kamen Rider will go for 770 Yen (tax included).

All are scheduled for shipment in September 2021. Preorders are being accepted starting July 27, 2021, at 11:00 JST until August 22, 2021, at 23:00 JST.

The Kamen Rider Series Transformation Belt Pins Collection features transformation belt pins with a mini box of the DX toy release. It uses the Transformation Belt package design! The window part of the package is also reproduced! A collection item that can be worn or displayed! The transformation belt series that has already appeared is for reference only, and there are parts that differ slightly from the actual product. Each pin has a body made of EP and the box is made of PET. The pins measure a width of 32 mm. The set includes a total of 5 kinds:

• Kamen Rider Saber: Width of approx. 50 mm
• Kamen Rider Zero One: Width of approx. 45 mm
• Kamen Rider Den-O: Width of approx. 45 mm
• Kamen Rider Kuuga: Width of approx. 43 mm
• Kamen Rider 1: Width of approx. 40 mm

The photos shown are prototypes. Please note that it may differ from the actual product. The capsule is included. Please note that the photos shown may differ from the actual product. The capsule is included, but we cannot compensate for damage to the capsule as it also serves as a cushioning material.

The Kamen Rider Series Transformation Belt Pins Collection will go for 300 Yen (tax included) each and are scheduled for shipment in September 2021. Preorders are being accepted starting July 27, 2021, at 11:00 JST.

“I am the child of the sun! Kamen Rider! Black! RX!” Premium Bandai is releasing a collection of apparel based on Kamen Rider Black and Kamen Rider Black RX. Items includes t-shirts, baseball caps, and bucket hats.

Kamen Rider Black One Point Embroidery t-shirt is an embroidered t-shirt from Kamen Rider Black. It has a simple design with one-point embroidery on the chest and a woven name with the program logo on the sleeve. It’s a great way to get your hands dirty. The shirt is made of 100% cotton and comes in sizes: M (Length: 69 cm, Body width: 52 cm, Shoulder width: 46 cm, Sleeve length: 20 cm), L (Length: 73 cm, Body width: 55 cm, Shoulder width: 50 cm, Sleeve length: 22 cm), XL (Length: 77 cm, Body width: 58 cm, Shoulder width: 54 cm, Sleeve length: 24 cm), XXL (Length: 81 cm, Body width: 63 cm, Shoulder width: 57 cm, Sleeve length: 25 cm). It is available in black and green.

The Kamen Rider Black One Point Embroidery t-shirt from Kamen Rider Black will go for 4,290 Yen (tax included).

The Kamen Rider Black RX One Point Embroidery t-shirt is an embroidered t-shirt from Kamen Rider Black RX. It has a simple design with one-point embroidery on the chest and a woven name with the program logo on the sleeve. It is made of thick and firm fabric. The shirt is made of 100% cotton and comes in sizes: M (Length: 69 cm, Body width: 52 cm, Shoulder width: 46 cm, Sleeve length: 20 cm), L (Length: 73 cm, Body width: 55 cm, Shoulder width: 50 cm, Sleeve length: 22 cm), XL (Length: 77 cm, Body width: 58 cm, Shoulder width: 54 cm, Sleeve length: 24 cm), XXL (Length: 81 cm, Body width: 63 cm, Shoulder width: 57 cm, Sleeve length: 25 cm). It is available in black and green.

The Kamen Rider Black RX One Point Embroidery t-shirt from Kamen Rider Black RX will go for 4,290 Yen (tax included).

The Kamen Rider Black One Point Embroidery Cap has the woven name of the program logo is embroidered on the front, and the icon of Kamen Rider Black is embroidered on the back. It is a simple design, so you can use it casually and has size adjustment on the back. The cap measures 58 cm with size adjustment measuring 56 cm – 60 cm. It is made of 100% cotton and is available in black and green.

The Kamen Rider Black One Point Embroidery Cap from Kamen Rider Black will go for 4,290 Yen (tax included).

The Kamen Rider Black One Point Embroidery Adventure bucket hat is a hat made of 100% cotton. The icon of Kamen Rider Black is embroidered on the front, and the woven logo of the show is designed on the side. The design is simple, so it can be used casually. The back size adjustment belt allows you to adjust the head circumference from 56 cm to 58 cm. The hat itself measures 58 cm.

The Kamen Rider Black One Point Embroidery Adventure bucket hat from Kamen Rider Black will go for 4,730 Yen (tax included).

The Kamen Rider Black RX One Point Embroidery Cap has the woven name of the program logo is embroidered on the front, and the icon of Kamen Rider Black RX is embroidered on the back. It is a simple design, so you can use it casually and has size adjustment on the back. The cap measures 58 cm with size adjustment measuring 56 cm – 60 cm. It is made of 100% cotton and is available in black and green.

The Kamen Rider Black RX One Point Embroidery Cap from Kamen Rider Black RX will go for 4,290 Yen (tax included).

The Kamen Rider Black RX One Point Embroidery Adventure bucket hat is a hat made of 100% cotton. The icon of Kamen Rider Black RX is embroidered on the front, and the woven logo of the show is designed on the side. The design is simple, so it can be used casually. The back size adjustment belt allows you to adjust the head circumference from 56 cm to 58 cm. The hat itself measures 58 cm.

The Kamen Rider Black RX One Point Embroidery Adventure bucket hat from Kamen Rider Black RX will go for 4,730 Yen (tax included).

All are scheduled for shipment in September 2021. Preorders are being accepted starting July 29, 2021, at 10:00 JST.

Following, we have the Kamen Rider 1 and Kamen Rider Kuuga x Yen Jeans x yoccatta+PLUS jeans. Each may become out of stock early due to stock availability.

Only cotton produced in Burkina Faso in Africa is used. This is a denim with ears made in Japan. Whenever yarns and fabrics made from this cotton are sold, a part of the proceeds is returned to the production area by the fabric manufacturer through the “Burkina Friendship Association of Japan” and is used for projects such as digging wells and establishing schools in the area. There are people who grow cotton to survive in a harsh environment. This is the first time that yarn, fabric (denim), and clothes (jeans) are produced. It is an attempt to make this environment a little better. It is also a sustainable initiative to support the continued production of high quality cotton.

Each has a simple classic straight shape with button fly + vintage specifications. The ears on the side of the jeans and chain stitching, as well as the mouth of the coin pocket and the handle are also designed with the ears. The rear pockets are made with hidden rivets and hidden cans, the belt loops are made with medium height, and the hem is made with special Union Special cans. The chain stitching on the belt is done all the way to the end of the belt, the rivets used are the hammered type, and the tuck button is a one-piece donut with a two-prong bottom part. The color of the lower part of the tuck button is intentionally changed to express the quality of the original denim. The stitching yarn is made with core yarn, a yarn whose color will change over time as you wear it. The front closure is a button instead of a zipper.

YenJeans is a premium jeans brand that started in Tokyo in 1996. While using vintage denim made on power looms made in Okayama, we aimed to create jeans that are not bound by conventional concepts. The brand not only incorporates Japanese traditional culture, techniques, and textiles such as Kyoto Yuzen and Amami Oshima mud dyeing, but also creates jeans with a 3D shape based on ergonomics. In addition, they have created a variety of new jeans, such as the ergonomic 3D shaped twisted jeans, the super hipster jeans with a separate fabric at the waist to make them look like a hipster, and the new jeans with a different pattern.

Future Jeans improved the production efficiency by eliminating the side seam and reducing the number of patterns. Conceptual ideas were quickly accepted overseas, and in 1998, he started selling his jeans at two major select stores in London, “Jones” and “Browns”. In 1998, the brand began selling its products at two major select shops in London, Jones and Browns, and later at L’eclairur in Paris and more than 90 other famous stores around the world. The brand was once closed in 2007, but it was revived in 2017 to celebrate the 20th anniversary of En Jeans. The concept of the brand has not changed at all, and it will continue to develop TOKYO Jeans that can be used in the future.

yoccatta+/yoccatta plus uses mottainai materials in the world. The ethical brand “yoccatta TOKYO”, which proposes bags made from reused car scrap wood, has created a new brand called “yoccatta+”. “yoccatta+” is a project to reuse leftover yarns and warps that are inevitably left over from the production process in the fashion industry. It’s good that they don’t throw them away.

Both jeans are made of 100% cotton and come in sizes: 28 (Waist: 79.6 cm, Hip: 95.9 cm, Waist: 55 cm, Inseam: 18.5 cm, Inseam: 81.4 cm), 30 (Waist: 84.6 cm, Hip: 100.9 cm, Waist: 57.5 cm, Inseam: 19.8 cm, Inseam: 81.4 cm), 32 (Waist: 89.6 cm, Hip: 106 cm, Waist: 60.2 cm, Inseam: 21.1 cm, Inseam: 86.5 cm), 34 (Waist: 95.6 cm, Hip: 111.1 cm, Waist: 62.8 cm, Inseam: 21.7 cm, Inseam: 86.6 cm).

The Kamen Rider 1 x YenJeans x yoccatta+PLUS jeans feature the “Rider Selvidge,” denim ears with green and red threads woven into them. This color scheme symbolizes Kamen Rider 1.

The Kamen Rider Kuuga x YenJeans x yoccatta+PLUS jeans features Kamen Rider Kuuga, who is a hero of justice with the concept of “A New Hero, A New Legend”. It is a triple collaboration of Kamen Rider Kuuga, a hero of justice with the concept of “A New Hero, A New Legend”, “YenJeans”, which provides designs that lead to the future, and “yoccatta+PLUS”, which tackles ethical issues with the wisdom and technology of fashion.

The Kamen Rider 1 and Kuuga x YenJeans x yoccatta+PLUS jeans from Kamen Rider and Kamen Rider Kuuga will go for 26,400 Yen (tax included) each and are scheduled for shipment in September 2021. Preorders are being accepted starting July 29, 2021, at 10:00 JST.

“A New Hero, A New Legend”. The Kamen Rider Kuuga silver925 ring features the ancient Linto script engraved on Kamen Rider Kuuga’s transformation belt. The side of the ring is engraved with a Romanized version of the Lint script. The ring is plain and simple, but has a strong presence with its solid thickness. It is made of silver925 and comes in sizes: No. 16, No. 18, No. 20, No. 22, No. 24, and No. 26. The photo is a prototype and may be different from the actual product. There are individual differences in the appearance of the smoked finish because it is done by hand. If you have any skin problems, please stop using the product and consult a doctor.

The Kamen Rider Kuuga silver925 ring from Kamen Rider Kuuga will go for 14,300 Yen (tax included) and is scheduled for shipment in November 2021. Preorders are being accepted today.

“Those who don’t fight won’t survive!!” The Kamen Rider Ryuki Sneaker| HENSHIN by KAMEN RIDER sneakers feature the visor expression of Kamen Rider Ryuki laid out boldly on the shoe tongues. By sewing genuine leather on the coarse mesh, it gives off an overwhelming sense of presence that is unparalleled in other sneakers. The midsole, which expresses the joints of the “Mirror Monster” that lives in the mirror world “Mirror World” that appears in the work, has been designed to create an impact on the profile of the sneaker.

In addition, the reflector print on the upper mesh, which reflects when photographed with a flash, is a dramatic representation of crossing over into the “mirror world”. It incorporates details reminiscent of Kamen Rider Ryuki in many places, such as the expression of claw marks on the toe and the reversed logo on the heel. The insole is designed with a CONTRACT card. The sneaker’s own feet were made to look like mirror monsters, creating a “wear it = contract” effect.

During the period from Monday, July 26th, 2021 to Sunday, August 8th, 2021, a campaign will be held to offer free shipping if you purchase the “Kamen Rider Ryuki Sneaker” and the MARQUEE PLAYER collaboration waterproof spray at the same time.
The campaign can be used as many times as you like during the campaign period.

Please be careful not to catch your foot on the silver parts when you put on or take off the shoes, as this may cause damage.
The sneakers have a loose fitting structure. If you are looking for a good fit, we recommend that you go one size smaller than your normal size. They are a casual type of shoes made of natural leather and rubber sole. The shoes come in Japanese shoe sizes: 24.5 cm, 25.5 cm, 26.5 cm, 27.5 cm, and 28.5 cm. The color of the product on the website may look different from the actual product.

The Kamen Rider Ryuki Sneaker| HENSHIN by KAMEN RIDER sneakers from Kamen Rider Ryuki will go for 25,300 Yen (tax included) and is scheduled for shipment in September 2021. Preorders are being accepted until August 8, 2021, at 23:00 JST.

Next, we have the Kamen Rider Ryuki M-65 Jacket Survive｜HENSHIN by KAMEN RIDER. The Kamen Rider Ryuki M-65 Field Jacket Survive features the theme”Survive”, which expresses the world of Kamen Rider Ryuki, who continues to fight until he is the last man standing. Based on the standard military jacket, the M-65 Field Jacket, details connected to Kamen Rider Ryuki have been added. It is eye-catching and has distinctive pockets. Each rider’s reason for fighting is expressed in inverted letters. The jacket reflects the mixed chaos of each rider’s justice and hope.

In addition, the front of the jacket is lined up with the image of a Kamen Rider fighting in a mirror world. The fit of the front of the jacket is deliberately reversed from that of a typical men’s jacket. When you look at yourself in the mirror, the front of the jacket is aligned in the correct direction. It represents a Kamen Rider fighting in a mirror world. A new pocket for cards has been added to the left sleeve. By incorporating details reminiscent of a drag visor into the jacket. The jacket has both functional and design aspects.

The drawcord at the waist, a detail of the M-65 Field Jacket, has been replaced with a nylon belt with a buckle. The buckle is the original buckle used in HENSHIN by KAMEN RIDER sneakers. The action at the waist when wearing the jacket becomes a symbol of his “HENSHIN”. By hanging the belt from your shoulder, you can also wear it in a completely different way. The military jacket has been reinterpreted by HENSHIN by KAMEN RIDER to create a mode look. It is made of 100% nylon for the outer fabric and 100% polyester fir the lining. The jacket comes in sizes: M (Length: 69 cm, Shoulder width: 50 cm, Waist: 113 cm, Sleeve length: 61 cm), L (Length: 72 cm, Shoulder width: 52 cm, Waist: 119 cm, Sleeve length: 62 cm), and XL (Length: 75 cm, Shoulder width: 54 cm, Waist: 125 cm, Sleeve length: 63 cm).

The Kamen Rider Ryuki M-65 Jacket Survive｜HENSHIN by KAMEN RIDER from Kamen Rider Ryuki will go for 33,000 Yen (tax included) and is scheduled for shipment in October 2021. Preorders are being accepted until August 8, 2021, at 23:00 JST.

To match with the jacket, we also have the Kamen Rider Ryuki Pants Mirror Monster｜HENSHIN by KAMEN RIDER. The Kamen Rider Ryuki Mirror Monster pants are part of Kamen Rider Ryuki’s apparel collection by HENSHIN by KAMEN RIDER. The Mirror Monsters wriggling in the mirror world is expressed with camouflage pants.

The original camouflage pattern is based on the design motif of the mirror monster that Yui Kanzaki drew in her childhood in Kamen Rider Ryuki. The mirror monster that blends into the mirror world is expressed in the camouflage pattern. The HENSHIN by KAMEN RIDER original buckle is at the waist. The pockets are large and square-shaped, giving the pants a martial masculine look, while the long belt gives a stylish impression. With a gently tapered silhouette, you can wear them as they are or roll them up. Wear them to highlight the sneakers on the feet.

It is made of 100% cotton. The pants come in sizes: M (waist: approx. 81 cm, hip approx: 116 cm, inseam: approx. 27.2 cm, lower leg: 69 cm, hem width: approx. 18 cm), L (waist: approx: 87 cm, hip: approx. 122 cm, inseam: approx. 27.7 cm, lower leg: approx. 71 cm, hem width: approx. 19 cm), and XL (waist approx: 93 cm, hips: approx. 128 cm, inseam: approx. 28.2 cm, lower leg: approx 73 cm, hem width: approx. 20 cm). The belt strap is long, so please be careful not to get caught in it or have an accident.

The Kamen Rider Ryuki Pants Mirror Monster｜HENSHIN by KAMEN RIDER from Kamen Rider Ryuki will go for 24,200 Yen (tax included) and is scheduled for shipment in October 2021. Preorders are being accepted until August 8, 2021, at 23:00 JST.

The Kamen Rider Ryuki Mirror Monster Contract t-shirts are available in 17 types. Mirror Monster contract t-shirts have appeared from Kamen Rider Ryuki. The contracted monster is determined by a predetermined fate. The design of the t-shirt for this project will be randomly selected from a total of 17 types. Are you ready to make a contract?

All shirts are made of 100% cotton and come in sizes: M (Length: 68 cm/Body width: 50 cm/Shoulder width: 43 cm/Sleeve length: 20 cm), L (Length: 71 cm/Body width: 53 cm/Shoulder width: 46 cm/Sleeve length: 21 cm), and XL (Length: 74 cm/Body width: 56 cm/Shoulder width: 49 cm/Sleeve length: 22 cm). The product is a t-shirt only. The card is not included. DRAGREDER, DARKWING, VOLCANCER, MAGNUGIGA, EVILDIVER, METALGELAS, VENOSNAKER, DESTWILDER, GIGAZELLE, BIOGREEZA, BLANCWING, DRAGBLACKER, GOLDPHOENIX, and ABYSSLASHER all have a 5.9% of winning. GENOCIDER, DRAGRANZER, and DARKRAIDER have a 5.8% of winning.

The Kamen Rider Ryuki Mirror Monster Contract t-shirts from Kamen Rider Ryuki will go for 3,300 Yen (tax included) and is scheduled for shipment in October 2021. Preorders are being accepted until August 8, 2021, at 23:00 JST.

“Now your power is at its peak.” The Kamen Rider Blade silver925 necklace Kazuma Kenzaki model ver.2 is based on the design that Kazuma Kenzaki wore in the TV series, Kamen Rider Blade. This is the second version of the necklace that was created for Kamen Rider Zi-O. The design is based on a sword motif and is made of silver. The pendant top and chain are made of silver925. The pedant top measure a height of approx. 50 mm x width of approx. 13.5 mm while the chain measures approx. 60 cm in length.

The Kamen Rider Blade silver925 necklace Kazuma Kenzaki model ver.2 from Kamen Rider Blade will go for 17,600 Yen (tax included) and is scheduled for shipment in November 2021. Preorders are being accepted today.

“We are the two-in-one Kamen Rider”  The Kamen Rider W WIND SCALE Wind Scale Earth Pendant ver.2 is a pendant made of silver925 that Philip wears in the Kamen Rider W TV series. The design is based on the image of the earth. The blue resin is at the center of the delicate silver work. It is a cute semi-circular design. The top (Earth)is made of silver925 and resin. The chain is brass plated. The top (Earth) measures a height of approx. 1.9 cm x width of approx. 1.4 cm with the chain measuring 50 cm length (including 5 cm for the adjuster).

The Kamen Rider W WIND SCALE Wind Scale Earth Pendant ver.2 from Kamen Rider W will go for 7,700 Yen (tax included) and is scheduled for shipment in October 2021. Preorders are being accepted today.

“Now, count your sins!” The Kamen Rider W Kamen Rider Skull Silver Pendant is a silver pendant that features the Kamen Rider Skull symbol. The pendant top is made of silver925. The chain is made of iron plating, brass plating, and Rodium color plating. The pendant top measures a length of approx. 30 mm, width of approx. 21 mm, and weight of approx. 11 g. The chain measures a total length of 50 cm (adjuster 5 cm). Please note that the pictures shown are prototypes and may vary slightly from the actual product. If you have any skin problems, please stop using the product and consult a doctor.

The Kamen Rider W Kamen Rider Skull Silver Pendant from Kamen Rider W will go for 12,650 Yen (tax included) and is scheduled for shipment in November 2021. Preorders are being accepted starting July 27th, 2021, at 10:00 JST.

To wear with the pendant, we also have the Kamen Rider W Kamen Rider Skull silver925 mark ring. This is a college-style silver925 ring with the mark of Kamen Rider Skull designed on it. The ring has been stained to bring out its austerity. This ring is made of silver925, which has a unique color that develops as it is used. There are individual differences in the way the black (smear) appears in the grooves of the pattern. Please note that it will not be exactly the same as the picture. The ring comes in sizes: No. 12, No. 14, No. 16, No. 18, No. 20, No. 22, No. 24, and No. 26. It weights approx. 21 g.

The Kamen Rider W Kamen Rider Skull silver925 mark ring from Kamen Rider W will go for 13,400 Yen (tax included) and is scheduled for shipment in November 2021. Preorders are being accepted starting July 27th, 2021, at 10:00 JST.

Premium Bandai is also releasing the Kamen Rider W Cyclone Joker and the Wind City Background merchandise including a t-shirt, hoodie, tote bag, and towel. Each item features Kamen Rider W in his Cyclone Joker form and the background of Futo City. It’s a cool design that’s been drawn up, so it’s a great piece for all Kamen Rider fans. These are must have items for fans who love Futo City and Kamen Rider W.

The Kamen Rider W Cyclone Joker and the Wind City Background t-shirt is made of 100% cotton and comes in sizes: S (Length: approx. 65 cm / Body width: approx. 47 cm / Shoulder width: approx. 40 cm / Sleeve length: approx. 19 cm), M (Length: approx. 68 cm / Body width: approx. 50 cm / Shoulder width: approx. 43 cm / Sleeve length: approx. 20 cm), L (Length: 71 cm/ Body width: 53 cm/ Shoulder width: 46 cm/ Sleeve length: 21 cm), and XL (Length: 74 cm / Body width: 56 cm / Shoulder width: 49 cm / Sleeve length: 22 cm).

The Kamen Rider W Cyclone Joker and the Wind City Background t-shirt from Kamen Rider W will go for 3,520 Yen (tax included).

The Kamen Rider W Cyclone Joker and the Wind City Background hoodie is made of 100% cotton and comes in sizes: M (Length: approx. 67 cm / Body width: approx. 50 cm / Shoulder width: approx. 44 cm / Sleeve length: approx. 62 cm), L (Length: approx. 70 cm / Body width: approx. 53 cm / Shoulder width: approx. 47 cm / Sleeve length: approx. 63 cm), and XL (Length: approx. 73 cm / Body width: approx. 56 cm / Shoulder width: approx. 50 cm / Sleeve length: approx. 64 cm).

The Kamen Rider W Cyclone Joker and the Wind City Background hoodie from Kamen Rider W will go for 8,140 Yen (tax included).

The Kamen Rider W Cyclone Joker and the Wind City Background tote bag is made of 100% polyester and measures about 37 cm x 44 cm.

The Kamen Rider W Cyclone Joker and the Wind City Background tote bag from Kamen Rider W will go for 2,750 Yen (tax included).

The Kamen Rider W Cyclone Joker and the Wind City Background towel has a front made of 100% polyester and a back side (pile side) that is made of 100% cotton. It measures approx. width of 39 cm x height of 109 cm.

The Kamen Rider W Cyclone Joker and the Wind City Background towel from Kamen Rider W will also go for 2,750 Yen (tax included).

All are scheduled for shipment in September 2021. Preorders are being accepted starting July 30, 2021, at 11:00 JST until August 24, 2021, at 23:00 JST.

The Kamen Rider Zero-One A.I.M.S. SQUAD Print t-shirt is an A.I.M.S. SQUAD t-shirt from the Kamen Rider Zero One TV series. It has a faint print. The body color is dark blue. It is made of 100% cotton and comes in sizes: M (Length: 68 cm, Body width: 50 cm, Sleeve length: 20 cm), L (Length: 71 cm, Body width: 53 cm, Sleeve length: 21 cm), XL (Length: 74 cm, Body width: 56 cm, Sleeve length: 22 cm), XXL (Length: 77 cm, Body width: 59 cm, Sleeve length: 22 cm). The product photos are prototypes and may differ from the actual product. The color of the actual product may look different from the picture shown.

The Kamen Rider Zero-One A.I.M.S. SQUAD Print t-shirt from Kamen Rider Zero-One will go for 3,300 Yen (tax included) and is scheduled for shipment in September 2021. Preorders are being accepted starting July 29th, 2021, at 10:00 JST.

“Become a writer and a swordsman!!” The Kamen Rider Saber Kamen Rider Slash x HELLCATPUNKS t-shirts features two designs: “Tin Sound Reading Shot” and “Bremen’s Rock Band”.

What is HELLCATPUNKS? HELLCATPUNKS is a punk fashion brand known for KERA and Zipper. With the concept of “Girls Punk Rock”, the brand has created a range of fashion items from the standard items of punk rockers such as vintage pants resized to the current style, taking in the fashion scene of London in the 1970s. Girly items that incorporate the punk rock fashion of the time in graphics and details. In 2008, they participated in an exhibition in London for the first time, and currently have about 30 stores overseas that carry their products.

Kamen Rider Slash and HELLCATPUNKS collaborate on this t-shirt collection from Kamen Rider Saber. HELLCATPUNKS is a punk fashion brand. The pictures on this site are under development and may differ slightly from the actual product. It is printed on the product. The print may not appear evenly on the sides. In addition, due to the nature of the print, there are some parts where the print becomes lighter. There will be some individual differences. Please wash with the printed side inside out, as it may come undone.

The Kamen Rider Saber Kamen Rider Slash x HELLCATPUNKS “Tin Sound Reading Shot” t-shirt is a flashy t-shirt with punk flair is just like a tin sound reading shot. The shirt comes in sizes: M (Length: 68 cm, Body width: 50 cm, distance from the sleeve: 43 cm), L (Length: 71 cm, width: 53 cm, distance from the sleeve: 45 cm), and XL (Length: 74 cm, width: 56 cm, distance from the sleeve: 47 cm). It is made of 100% polyester, which makes it cool and easy to wear.

The Kamen Rider Saber Kamen Rider Slash x HELLCATPUNKS “Bremen’s Rock Band” t-shirt has a pattern of the Bremen Rock Band Wonder Ride Book. The shirt comes in sizes: M (Length: 70 cm / Body width: 52 cm/ Shoulder width: 47 cm / Sleeve length: 20 cm), L (Length: 74 cm / Body width: 55 cm / Shoulder width: 50 cm / Sleeve length: 22 cm), XL (Length: 78 cm / Body width: 58 cm / Shoulder width: 53 cm / Sleeve length: 24 cm), and XXL (Length: 82 cm / Body width: 61 cm / Shoulder width: 56 cm / Sleeve length: 26 cm). It is made of 100% cotton.

The Kamen Rider Saber Kamen Rider Slash x HELLCATPUNKS “Tin Sound Reading Shot” t-shirt from Kamen Rider Saber will go for 5,900 Yen (tax included) while the Kamen Rider Saber Kamen Rider Slash x HELLCATPUNKS “Bremen’s Rock Band” t-shirt will go for 3,500 Yen (tax included). Both are scheduled for shipment in August 2021. Preorders are being accepted starting July 28th, 2021, at 10:00 JST.

Yuri, Ryoga Shindai, and Reika Shindai have joined the rest of the Swordsmen in the Kamen Rider Saber deformed acrylic charms line. Each measures approx. height of 60 mm. The size differs depending on the character. Please note that the product photos on this page are prototypes and may differ from the actual product.

Volume 1 includes:

• Kamen Rider Saber
• Kamen Rider Blades
• Kamen Rider Espada
• Kamen Rider Buster
• Kamen Rider Kenzan
• Kamen Rider Slash
• Kamen Rider Calibur
• Touma Kamiyama
• Rintaro Shindo
• Kento Fukamiya
• Ryo Ogami
• Ren Akamichi
• Tetsuo Daishinji

Volume 2 includes:

• Kamen Rider Saikou Kin no Buki Gin no Buki
• Kamen Rider Sabela
• Kamen Rider Durandel
• Yuri
• Reika Shindai
• Ryoga Shindai

The Kamen Rider Saber deformed acrylic charms vol. 1 and vol. 2 from Kamen Rider Saber will all go for 550 Yen (tax included) each and are scheduled for shipment in September 2021. Preorders are being accepted starting July 28th, 2021, at 10:00 JST.

To commemorate the 50th anniversary of Kamen Rider, Premium Bandai is releasing the Kamen Rider Saber & Kamen Rider 50th Mark Circle Pattern hoodie and t-shirt.

The Kamen Rider Saber & Kamen Rider 50th Mark Circle Pattern hoodie is a zip-up hoodie with a mark design commemorating the 50th anniversary of the Kamen Rider series. The design features marks from Kamen Rider 1 to the currently airing Kamen Rider Saber. It is made of 100% cotton and comes in sizes: M (Length: 67 cm, Body width: 50 cm, Shoulder width: 44 cm, Sleeve length: 62 cm), L (Length: 70 cm, Body width: 53 cm, Shoulder width: 47 cm, Sleeve length: 63 cm), and XL (Body length: 73 cm, Body width: 56 cm, Shoulder width: 50 cm, Sleeve length: 63 cm).

The Kamen Rider Saber & Kamen Rider 50th Mark Circle Pattern t-shirt is a t-shirt that features a mark design commemorating the 50th anniversary of the Kamen Rider series. The design features marks from Kamen Rider 1 to the currently airing Kamen Rider Saber. The silhouette is slim. It’s a great way to celebrate the 50th anniversary of the Kamen Rider series. It is made of 100% cotton and comes in sizes: M (Length: 68 cm, Body width: 50 cm, Shoulder width: 43 cm, Sleeve length: 20 cm), L (Length: 71 cm, Body width: 53 cm, Shoulder width: 46 cm, Sleeve length: 21 cm), XL (Length: 74 cm, Body width: 56 cm, Shoulder width: 49 cm, Sleeve length: 22 cm), and XXL (Length: 78 cm, Body width: 59 cm, Shoulder width: 52 cm, Sleeve length: 23 cm).

The Kamen Rider Saber & Kamen Rider 50th Mark Circle Pattern hoodie will go for 6,930 Yen (tax included) while the Kamen Rider Saber & Kamen Rider 50th Mark Circle Pattern t-shirt will go for 3,300 Yen (tax included). Both are scheduled for shipment in August 2021. Preorders are being accepted starting July 28th, 2021, at 10:00 JST.

Premium Bandai is doing another run of the Display Pedestal ver.2. The display pedestal has been renewed with an additional base to hold the belt itself! This is a display pedestal for transforming belts that can be wrapped around a belt-shaped toy.
By attaching the newly included adjustment parts to the lower part of the buckle, the buckle can now be supported and displayed in a stable manner. It can also be stacked up to two layers as before, and the size of the belt belt can be adjusted using the existing extension parts. Depending on the shape of the belt to be attached, it may not be possible to stack them on top of each other.

The set includes the display pedestal, two extension parts, three large adjusting parts, and three small adjusting parts. It measures a diameter of approx. 200 mm, height of approx. 160 mm, and circumference of approx. 630 mm (Girth size: approx. 630 mm to approx. 790 mm (adjustable)). Everything is made of ABS.

The Display Pedestal ver.2 will go for 2,200 Yen (tax included) and is scheduled for shipment in November 2021. Preorders are being accepted until August 25th, 2021, at 23:00 JST.

Moving onto the Super Sentai Series, we have the Super Sentai Hisa Masato & K-SuKe Uchuu Sentai Kyuranger/Kaitou Sentai Lupinranger VS Keisatsu Sentai Patranger Rubber Charms. This is a series of rubber charms illustrated by K-SuKe and Masato Hisa, who were responsible for many character designs in Super Sentai. From Uchuu Sentai Kyuranger, there’s Balance (K-SuKe), Sho Long Po (K-SuKe), Garu (Masato Hisa), Champ (Masato Hisa), and Raptor 283 (Masato Hisa). From Kaitou Sentai Lupinranger VS Keisatsu Sentai Patranger, there’s Gauche le Medou & Destra Maggio (Masato Hisa). It is a total of 6 characters. It is a newly drawn illustration product! Each measures approximately width of 50 mm x height of 75 mm x 80 mm (2D). Size is different depending on the character. All are made of PVC.

The Super Sentai Hisa Masato & K-SuKe Uchuu Sentai Kyuranger/Kaitou Sentai Lupinranger VS Keisatsu Sentai Patranger Rubber Charms from Uchuu Sentai Kyuranger and Kaitou Sentai Lupinranger VS Keisatsu Sentai Patranger will go for 770 Yen (tax included) each and are scheduled for shipment in October 2021. Preorders are being accepted starting July 27th, 2021, at 10:00 JST.

After, is the Super Sentai x K-SuKe Rubber Charm Mashin Sentai Kiramager/ Uchuu Sentai Kyuranger/ Zyuden Sentai Kyoryuger Rubber Charms from Mashin Sentai Kiramager, Uchuu Sentai Kyuranger, and Zyuden Sentai Kyoryuger. These rubber charms are illustrated by K-SuKe, who has been in charge of many character designs for Super Sentai. Mr. K-SuKe, who has an established reputation for skillfully combining multiple motifs into one, has created a charm that is even cuter and more deformed. It’s a newly illustrated product that K-SuKe, who is known for his ability to skillfully combine multiple motifs into one, has deformed into something even cuter.

The charms lineup features the mischievous Princess Mabushiina, the treacherous Demonic General of Betrayal Galza, and the cowardly Mask of Darkness Carantula from Mashin Sentai Kiramager as well as Madakko from Uchuu Sentai Kyuranger, and Joyful Knight Candelilla/Funfilled Spy Luckyuro from Zyuden Sentai Kyoryuger, a cheerful duo. Each measures a height of approx. 75 mm x width of 50 mm and is made of PVC.

The Super Sentai x K-SuKe Rubber Charm Mashin Sentai Kiramager/ Uchuu Sentai Kyuranger/ Zyuden Sentai Kyoryuger Rubber Charms from Mashin Sentai Kiramager, Uchuu Sentai Kyuranger, and Zyuden Sentai Kyoryuger will go for 770 Yen (tax included) each and are available now.

Soaring into the Ultra Series, we have the Ultraman Tiga Toy Design merchandise collection including a t-shirt, a hoodie, a tote bag, and a towel. Each item is designed with toys that were sold at the time of Ultraman Tiga’s broadcast. They are not only nostalgic, but also fashionable with its new design, and is recommended for all Ultraman fans. The “TIGASedai” (TIGA generation) logo is also incorporated in the center. For those of you who are fans of Tiga, these items are a must-have for the “Ultraman Tiga Generation”.

The Ultraman Tiga Toy Design t-shirt is made of 100% cotton and comes in sizes: S (Length: approx. 65 cm / Body width: approx. 47 cm / Shoulder width: approx. 40 cm / Sleeve length: approx. 19 cm), M (Length: approx. 68 cm / Body width: approx. 50 cm / Shoulder width: approx. 43 cm / Sleeve length: approx. 20 cm), L (Length: 71 cm/ Body width: 53 cm/ Shoulder width: 46 cm/ Sleeve length: 21 cm), and XL (Length: 74 cm / Body width: 56 cm / Shoulder width: 49 cm / Sleeve length: 22 cm). It is available in both black and white.

The Ultraman Tiga Toy Design t-shirt from Ultraman Tiga will go for 3,520 Yen (tax included).

The Ultraman Tiga Toy Design hoodie is made of 100% cotton and comes in sizes: M (Length: approx. 67 cm / Body width: approx. 50 cm / Shoulder width: approx. 44 cm / Sleeve length: approx. 62 cm), L (Length: approx. 70 cm / Body width: approx. 53 cm / Shoulder width: approx. 47 cm / Sleeve length: approx. 63 cm), and XL (Length: approx. 73 cm / Body width: approx. 56 cm / Shoulder width: approx. 50 cm / Sleeve length: approx. 64 cm).

The Ultraman Tiga Toy Design hoodie from Ultraman Tiga will go for 8,140 Yen (tax included).

The Ultraman Tiga Toy Design tote bag is made of 100% polyester and measures about 37 cm x 44 cm.

The Ultraman Tiga Toy Design tote bag from Ultraman Tiga will go for 2,750 Yen (tax included).

The Ultraman Tiga Toy Design towel has a front made of 100% polyester and a back side (pile side) that is made of 100% cotton. It measures approx. width of 39 cm x height of 109 cm.

The Ultraman Tiga Toy Design towel from Ultraman Tiga will also go for 2,750 Yen (tax included).

Overseas fans can use From Japan to purchase exclusive tokusatsu merchandise. Click here for our guide to using From Japan.

Source: Premium Bandai